In every household, safety should be the top priority. The reason being is that many accidents can occur from time to time. One of the more common types of accidents is fire. Consequently, most families will buy devices such as alarms. But fitting a firm alarm is not that easy and must planned properly. You need to keep in mind certain tips that will help you be sure that your fire alarm is fitted with the utmost precision.
The Fire Alarm for you
First thing to do is to know that kind of fire alarm you are getting. There is a wide array of fire alarm which you can have your pick but choose the one which fulfills your need.
Ionization Alarms- This type of alarms works best detecting the smaller smoke particles. The alarms is sensitive to smoke created by fire ignited by using grease or paper, or by arsonists. You may also see this kind of alarm come together with carbon monoxide detectors. Check out https://en.wikipedia.org/wiki/Fire_alarm_system for more info about fire alarm.
Photoelectric alarms- Using a strobe light, the photoelectric alarm can detect bigger smokes caused by burning house furniture. This kind of alarm is more costly compared to it’s other counterparts but it is the alarm which is least likely to be accidentally triggered.
Dual-sensor smoke alarms- This combines the other two’s properties into one alarm. This alarm is also the most expensive compared to the three but is also one of the best alarms in the market.
Areas to Install your Fire Alarm
The best place to install your fire alarm is outside each bedroom. Including your basement and attic, make sure to install a fire alarm on every level of the house. Install smoke alarms close to the ceiling, ideally not more than 12 inches. Never install smoke alarms near windows or ducts where wind can easily move in and out for it might interfere with its functioning.
Fire alarms need little maintenance. Give a few mins of your time every now and then to make sure the fire alarm is functioning properly. Trigger your fire alarm every now and then for this is very important. It is a good idea to test your fire alarm, at least once a month. If your fire alarm runs on batteries, then make sure it is not yet drained out and if it is, change it. In addition, use the battery instructed by the manufacturer to prevent malfunction. To prevent damage, clean your fire alarm from time to time while following the manufacturer’s instructions. Know more about fire protection.
The mentioned tips where but a few tips to make sure fire does not compromise the safety of your home. Knowing which kind of fire alarm to choose for your home is vital to the safety of your family. Also, choosing the correct areas to put the alarm can mean the safety of your family. And taking time to maintain the functionality of your fare alarm can ensure the safety of your family.